A water storage tank can be expensive to construct but it has its paybacks. It keeps drinking water clean, safe and in adequate supply. With the whole world making an attempt at going green, installing a water tank is one way of preserving water and making sure you do your bit to help the environment. Here is a check list for things to consider during installation.

Planning
If you are installing a tank of less than 10000 litres you don’t need an approval from your local council but if you are installing a large installing a large tanks get prior permission from the council. Know the rule and regulations enforced by the government. For example in Australia a water tank cannot be installed over a sewer.

Plumbing work
If you are installing a water tank indoors you have to maintain a minimum water level. You can also install a control valve which reverts to drinking water when the tank is empty. You must install a flow restrictor to curb overflow and maintain favourable water pressure for your neighbours. There should be an air gap between the pipes that connect the main outlet to the tank.

Backflow
When rainwater from the tank mixes with the drinking water supply it is called backflow. You have to install a prevention device to make sure this does not happen. Poly water tanks are one such device. This device is not required when the tank is independent from the rainwater harvested from the roof. You can also install containment protection device at the master water meter to prevent backflow.

Pumps
Depending on the location of your tanks you may have to install a pump, an aid to help water flow freely. It improves the water pressure and if you opt for a solar panel turns out to be cost effective and environment friendly.

Protection
Install screens to make sure insects and other organic matter do not enter the tank and contaminate the water. To find on more on poly water tanks, steel water tanks in SA visit www.mastertanks.com.au for great deals on the tank you require.


Related Blogs